Permatex Cold Weld 2-Part Epoxy 14600

Permatex Cold Weld Bonding Compound is a 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. It repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper. Once cured, it can be drilled, tapped, threaded, filed, sanded and painted.

Features:

• Two-part adhesive and filler system that eliminates the need for welding or brazing
  
• Suggested for these materials: Aluminum, Steel, Brass, Bronze, Castings and Stampings
• Dries dark grey
  
• Resistant to anti-freeze, fuel, oil, water and other automotive fluids
  
• Can be drilled, filed and threaded
  
• Up to 3000 PSI strength on steel
• 2 OZ
  
  

Directions:

• Surface must be clean, dry and free from grease and dirt. Use Permatex Brake & Parts
  
• Cleaner for best surface preparation; use isopropyl alcohol on plastics. To improve bond strength, roughen bond area with coarse sandpaper or wire brush prior to application.
  
• Squeeze out equal amounts of weld agent and hardening agent; mix thoroughly until color is
  uniform.
  
• Apply to surface being repaired and remove excess material immediately.
  
• Sets in 8 minutes. Allow 16 hours (overnight) before returning part(s) to service.