Moose Racing Fuel Pump Rebuild Kit for 2014–2023 KTM and Husqvarna Enduro Dualsport Models

The Moose Racing Fuel Pump Rebuild Kit (1009-0095) is a comprehensive, drop-in solution designed to restore proper fuel pressure and delivery on modern fuel-injected off-road motorcycles. When a factory fuel pump fails, dealerships typically only offer the complete, highly expensive fuel pump module assembly. This rebuild kit allows you to affordably replace just the internal mechanical components that have failed or degraded over time.

Engineered to meet or exceed OEM specifications, this kit includes a brand-new pump motor, a replacement in-tank fuel strainer, a high-pressure corrugated hose, stainless steel clamps, and the necessary wiring harness. It is a direct plug-and-play installation that slots precisely into your motorcycle's factory plastic fuel pump housing, immediately restoring lost engine performance, curing hard-starting issues, and fixing off-idle bogging caused by a dying pump.

Features:

• OEM Module Rebuild: Replaces the internal wear components of your factory fuel pump assembly, saving you from purchasing an entirely new OEM module.

• Plug-and-Play: Designed as a direct drop-in replacement with exact factory dimensions and wiring connectors.

• Complete Kit: Includes everything required for a full rebuild, ensuring you do not have to reuse old, clogged internal filters or brittle hoses.

• Restores Performance: Cures lean-running conditions, hesitation, and hard starting associated with a failing pump motor or a heavily restricted internal filter.

• Economical Solution: Costs a fraction of the price of a complete OEM KTM or Husqvarna fuel pump assembly.

What's in the Box:

• 1x All Moose Racing Pump Motor

• 1x In-Tank Fuel Filter / Strainer

• 1x Corrugated High-Pressure Hose

• 1x Wiring Harness

• Required Stainless Steel Crimp Clamps

• (Note: Exact contents may vary slightly based on specific model requirements, but will fully rebuild the target OEM module).

Fitment:

• 2014–2023 – Husqvarna FE250, FE350, FE450, FE501

• 2018–2023 – Husqvarna TE250, TE300

• 2016–2025 – Husqvarna 701 Enduro
  
  

• 2012–2023 – KTM 250 EXC-F, 350 EXC-F, 450 EXC-F, 500 EXC-F

• 2018–2023 – KTM 150 XC-W, 250 XC-W, 300 XC-W

• 2012–2023 – KTM 350 XCF-W, 500 XCF-W
  
  

• 2021–2023 – GasGas EX 250F, EX 350F, EX 450F

• 2021–2023 – GasGas EX 300

• 2021–2023 – GasGaS EC 250F, EC 350F

• 2021–2023 – GasGas EC 250, EC 300

• 2023–2025 – GasGas ES 700
  
  

• 2016–2026 – Beta 350 RR, 390 RR, 430 RR, 480 RR

• 2016–2026 – Beta 350 Race, 390 Race, 430 Race, 480 Race

Fitment Notes:

• Cleanliness is Mandatory: The number one cause of premature fuel pump failure is dirt and sand entering the fuel tank during refueling or module removal. Before you pull the OEM module out of your gas tank, meticulously clean the area around the mounting flange. When reassembling the pump with this new kit, work on a perfectly clean workbench. Even a microscopic grain of sand that bypasses the strainer can lock up the impeller on your new pump motor or instantly clog your fuel injector.

• Verification: Due to the massive cross-compatibility of this pump motor, please verify your specific year, make, and model requires the 47-2036 kit prior to teardown.

Part Number: 1009-0095