Maxima Foam Cannon Attachment for Pressure Washers

The Maxima Foam Cannon (10132) is a commercial-grade, venturi-induction pressure washer attachment engineered for cleaning off-road motorcycles, adventure bikes, ATVs, and UTVs. Scrubbing a mud-encrusted motorcycle with a wash mitt or brush immediately drags sharp silica sand, clay particles, and dried silt across plastic bodywork and vinyl graphic kits, inflicting permanent swirl marks and dulling gloss finishes. Conversely, standard garden hose sprayers lack the fluid velocity and aeration required to generate clinging foam that can loosen baked-on trail grime.

Engineered with a solid brass valve manifold and stainless steel internal metering components, the Maxima Foam Cannon connects directly to pressure washer spray wands via an industry-standard 1/4-inch quick-connect plug. High-pressure water passing through the internal venturi chamber draws concentrated detergent from the 32 fl oz reservoir bottle, blending it with ambient air to atomize a dense, high-cling foam blanket. Dual adjustments—a top-mounted chemical metering knob and a rotating front fan nozzle—allow riders to fine-tune foam consistency from a broad 60-degree fan pattern to a concentrated stream. This non-contact pre-wash process encapsulates abrasive grit and hydrates dried clay before water pressure is applied to the frame, wheels, and engine cases.

Features:

• Machined Solid Brass Manifold: Heavy-duty brass body and stainless steel metering jet resist corrosion, thread galling, and chemical degradation from concentrated detergents.

• 1/4-Inch Quick-Connect Interface: Standard 1/4" male quick-disconnect plug snaps directly into common pressure washer trigger guns and extension wands.

• Adjustable Chemical Induction Dial: Top-mounted control knob fine-tunes detergent draw to modulate foam consistency from light rinse suds to ultra-thick clinging foam.

• Variable Fan Pattern Nozzle: Rotating front barrel collar adjusts the spray profile from a focused pencil stream to a wide, uniform horizontal or vertical fan pattern.

• Impact-Resistant 32 oz Reservoir: Translucent high-density polyethylene (HDPE) bottle features wide-mouth filling and volumetric measurement markings for accurate chemical dilution.

• Touchless Pre-Wash Capability: Encapsulates trail loam, clay, and sand within a stable foam blanket to minimize sponge-drag micro-marring on plastics and graphics.

• Detergent Optimized: Engineered specifically for pairing with Maxima BIO Foam Cleaner (Part #80-86932) and Maxima Bio Wash, while remaining compatible with all powersports foaming soaps.

What's in the Box:

• 1x Maxima Solid Brass Foam Cannon Manifold Assembly with Adjustable Spray Head

• 1x 32 fl oz (946 mL) Translucent HDPE Fluid Reservoir Bottle

• 1x Pre-Installed 1/4" Male Quick-Connect Brass/Steel Plug

• 1x Flexible Chemical Suction Tube with Weighted In-Line Mesh Filter

Operating Parameters & Compatibility:

• Pressure Washer Range: Compatible with electric and gas-powered pressure washers operating between1,100 PSI (minimum) and3,500 PSI (maximum).

• Flow Rate Requirement: Operates efficiently between1.4 GPM and 5.3 GPM (optimum foam density achieved between 1.8 and 2.5 GPM).

• Maximum Water Temperature: 140°F (60°C).

• Wand Connection: Standard 1/4-inch female quick-connect coupler on the trigger gun or spray wand.

• Chemical Compatibility: Safe for use with biodegradable cleaners, high-foaming soaps, and non-acidic all-purpose degreasers. Donot use with caustic solvent-based degreasers, muriatic acid, or raw hydrocarbons.

Part Number: 10132