FREE SHIPPING ON ORDERS $149+
**SOME RESTRICTIONS APPLY
FREE SHIPPING ON ORDERS $149+
**SOME RESTRICTIONS APPLY
Store Updates
The Acerbis 3.1 Gallon (12L) Off-Road Fuel Tank (2988740001 Black /2988740147 Natural) is a lightweight, compact polyethylene replacement tank engineered for the 2025+ Yamaha Tenere 700. While the factory 4.22-gallon (16L) stamped steel tank provides extended highway range, it carries 11.46 lbs (5.2 kg) of dry steel mass plus over 25 lbs of fuel high above the engine—raising the motorcycle's center of gravity, creating noticeable fuel slosh in rough terrain, and denting easily during rocky off-road tip-overs.
Molded in Italy from high-impact, abrasion-resistant reticulated polyethylene, this 3.17-gallon (12L) tank is built specifically for enduro, rally, and technical off-road riders prioritizing agility over long-range touring.At 5.7 lbs (2.6 kg) dry, it cuts empty tank weight roughly in half—saving 5.7 lbs (2.6 kg) in dry hardware alone and approximately 12.2 lbs (5.5 kg) overall when filled compared to a full OEM tank.Its slimmer, more compact profile reduces upper-chassis fuel slosh and allows riders to slide farther forward over the front wheel when attacking steep climbs, deep sand, and tight singletrack.
50% Dry Weight Reduction:Weighs just 5.73 lbs (2.6 kg) empty compared to 11.46 lbs (5.2 kg) for the OEM 2025+ steel tank, removing 5.73 lbs of high-mounted mass before adding fuel.
12.2 lb Total Wet Weight Savings:Reducing capacity from 4.22 gal (16L) to 3.17 gal (12L) eliminates roughly 6.5 lbs of top-heavy fuel load for sharper handling and easier bike recovery.
Slim Off-Road & Enduro Ergonomics:Compact exterior profile improves knee grip and rider mobility when standing on the footpegs or weighting the front end.
Reduced Fuel Slosh:Smaller internal chamber minimizes lateral fuel movement during aggressive braking, rutted descents, and side-hill transitions.
Impact-Resistant Polyethylene Construction:Reticulated cross-linked polymer flexes under impact without denting, rusting, or cracking like factory sheet metal.
OEM Fuel Pump & Bodywork Compatibility: Accepts the factory Yamaha fuel pump, fuel level sender, and 2025+ tank shrouds/plastics directly.
Two Color Variants:Available inBlack (2988740001) for a factory-matched finish orNatural / Translucent (2988740147) for instant visual fuel-level checks.
1x Acerbis 3.17 Gallon (12L) Polyethylene Fuel Tank in selected color:
Black Variant:Part #2988740001 (0028342.090)
Natural / Translucent Variant:Part #2988740147 (0028342)
1x Acerbis Non-Locking Screw Gas Cap & Sealing Gasket
1x Fuel Cap Vent Hose & One-Way Check Valve
1x Model-Specific Mounting Hardware Kit (Acerbis #0028343)
1x Installation Instruction Manual
(Note: Reuses OEM Yamaha fuel pump assembly, fuel level sender, and factory side fairings).
Generation Incompatibility Warning:Engineered exclusively for the redesigned2025+ Yamaha Tenere 700 chassis and seat junction. DoesNOT fit 2019–2024 Tenere 700 models or Tenere 700 World Raid dual-tank models.
Aftermarket Crash Bar & Accessory Note: Designed around OEM motorcycle dimensions.Bikes fitted with high-mount upper crash bars or aftermarket steering stabilizers may experience clearance interference and should be test-fitted prior to adding fuel.
Usage Notice: Intended for off-road and closed-course competition use;verify local emissions and on-road compliance regulations prior to highway operation.
OEM Fuel Pump Transfer & Gasket Inspection: The Acerbis 12L tank utilizes your factory Yamaha fuel pump and float assembly. Before unbolting the pump from the stock steel tank, blow away all trail dust around the mounting flange with compressed air so grit cannot enter the fuel system. Inspect the large rubber OEM fuel pump sealing ring for swelling, flattening, or nicks—ethanol fuel exposure often stretches older gaskets, making them difficult to seat inside a new polymer tank groove. If the seal shows any distortion, install a new Yamaha OEM pump gasket and tighten the flange bolts progressively in acrisscross pattern so the rubber compresses evenly without warping the molded brass inserts.
EFI Quick-Disconnect & Vent Hose Routing: The 2025+ Tenere 700 feeds pressurized fuel to the throttle bodies via a plastic quick-connect coupling under the tank. Wrap a shop rag around the fitting before releasing the safety tab to catch residual line pressure, and when reconnecting it to the pump outlet, push firmly until you hear a distinct click—tug gently downward afterward to confirm the retainer lock is engaged. Route the supplied Acerbis cap vent hose down through the frame neck clear of the steering stops, radiator fan shroud, and hot front exhaust header pipes.
Dash Fuel Gauge Behavior & Reserve Range: Because the 3.17-gallon (12L) tank has a narrower, shallower internal profile than the 4.22-gallon (16L) factory tank, the OEM fuel level float travels through a tighter vertical arc. Expect the upper segments on your 2025+ TFT fuel gauge to drop slightly faster than stock, while the low-fuel reserve indicator will still trigger reliably near the bottom of the tank. Riders who choose theNatural (2988740147) colorway can verify exact fuel levels visually through the translucent tank walls at any time.


Part Number: 2988740001
Part Number: 2988740147
26.11
If you have any questions or need help finding what you need for your motorcycle or your next adventure please reach out:
EMAIL US AT tmbrmoto@tmbrmoto.com- OR CALL - 208-254-2044
Our shop is temporarily closed. Check back soon — we'll be back before the next ride.