The Fasst Co. Spoke Torque Wrench is a purpose-built tool designed to deliver consistent and accurate spoke tension across your entire wheel. First introduced in 1998 and still manufactured in-house, every wrench is 100% made in the USA and calibrated for reliable performance before it leaves the shop.
This preset wrench is set at 48 in-lbs, a proven torque that protects your wheel components while keeping spokes tight through hard impacts. Fasst Co. can also preset the wrench to your preferred torque:
48 in-lbs for most motorcycles, 85cc and up
36 in-lbs for 65cc and smaller **Available by special order only
The result is a dependable tool that helps prevent uneven wheel tension, improves wheel longevity, and takes the guesswork out of spoke maintenance.
|
Beta |
Wrench Head Size |
|
All |
6.8 F/R |
|
BMW |
Wrench Head Size |
|
GS 650 |
5.6 F, 6.0 R |
|
GS 800 |
6.0 F, 6.8 R |
|
Gas Gas |
Wrench Head Size |
|
Gas Gas - older models |
6.0 F/R |
|
Trials bikes |
6.0 F, 6.8R |
|
2015-2019 Moto/Off-Road |
6.0 F, 6.8 R |
|
2020+ Full Size Models 85cc+ |
6.8 F/R |
|
50/65: all |
5.5 F/R |
|
Honda |
Wrench Head Size |
|
CR 125/250/500: up to 01 |
6.0 F, 6.3 R |
|
CR 125/250: 02-07 |
6.0 F, 6.5 R |
|
CRF 250/450: 02-present |
6.0 F, 6.5 R |
|
CR 85/150: 07 current: |
5.6 F/R |
|
CR 80/85: up to 2010 |
6.0 F/R |
|
XR 250/400/600/650R: all |
6.0 F/R |
|
XR/CRF 80/100: all |
5.0 F/R |
|
CRF 150/230: all |
5.6 F/R |
|
XR/CRF 50: all |
4.0 F/R |
|
* The 6.0 and 6.5 Heads are the correct Heads to use with our wrenches on any Honda calling out for either a 5.9 or 6.4 head size. |
|
|
Husqvarna |
Wrench Head Size |
|
65 |
5.5 F/R |
|
85/105 |
6.8 F/R |
|
All models: up to 99 |
6.2 F/R |
|
All models: 00-05 |
5.6 F, 6.0 R |
|
All models: 06-present |
6.8 F/R |
|
Kawasaki |
Wrench Head Size |
|
KX 60/65: all |
5.0 F/R |
|
KX 80/85/100: 99-10 |
6.0 F/R |
|
KX 125/250/500: up to 99 |
6.0 F 6.3 R |
|
KX 125/250/250F: 99-04 |
6.7 F/R |
|
KX 125: 05-07 |
6.7 F/R |
|
KX 250: 05-07 |
6.0 F 6.7 R |
|
KX250F/450F: 06-present |
6.0 F 6.7 R |
|
KLX 250/300: all |
6.0 F/R |
|
KDX 200/220: all |
6.0 F/R |
|
KTM |
Wrench Head Size |
|
All full size models |
6.8 F/R |
|
85/105 |
6.8 F/R |
|
50/65: all |
5.5 F/R |
|
Suzuki |
Wrench Head Size |
|
RM 85: all |
5.0 F/R |
|
RM 125/250/RMZ250F:00-04 |
6.2 F, 6.7 R |
|
RM 125/250: 05-present |
6.2 F, 6.7 R |
|
RMZ 250F/450F:05-present |
6.2 F, 6.5 R |
|
DR/DRZ 250/350:all |
6.0 F/R |
|
DRZ 400: 00-present |
6.2 F, 6.5 R |
|
TM |
Wrench Head Size |
|
Moto/Off-road |
6.0 F/R |
|
Tusk |
6.5 F/R |
|
Yamaha |
Wrench Head Size |
|
YZ/WR 125/250/400:up to 99 |
6.0 F, 6.2 R |
|
YZ/YZF/WR 125-250 / 250-400-426-450F: 99–04 |
6.2 F, 6.7 R |
|
YZ 125/250: 05-present |
6.2 F, 6.5 R |
|
YZ/WR 250F/450F:05 |
6.2 F, 6.7 R |
|
YZF/WR 250F/450F:06-present |
6.2 F, 6.5 R |
|
YZ 80/85: all |
5.6 F/R |
|
YZ 65 |
5.0 F/R |
|
TTR 250: all |
5.6 F, 6.0 R |
|
TTR 125: all |
5.6 F/R |
|
TTR 50: all |
4.0 F/R |
|
HARLEY-DAVIDSON** |
Wrench Head Size |
|
Pre-1980 ** |
5.6 F/R ** |
|
1980 to current ** |
6.0 or 6.2 (see below) ** |
|
Fasst have narrowed down the Harley-Davidson applications to 3 sizes, 5.6, 6.0, and 6.2. This has been very difficult due to the vast number of units sold. Above are the head sizes that Harley Davidson orders from us as well as the general size by decades. Rad Wheels require a 6.2mm head. Warp 9 Wheels require a 6.8mm head.
|
|
If you have any questions or need help finding what you need for your motorcycle or your next adventure please reach out:
EMAIL US OR CALL 208-254-2044
