Akrapovic Off-Road Slip-On Exhaust for the Yamaha Tenere 700

The Akrapovic Off-Road Slip-On Exhaust (S-Y7SO2-HFTT) is a premium, race-tested exhaust upgrade engineered specifically for the Yamaha Tenere 700. Developed to withstand the demands of long-distance rally navigation and aggressive off-road adventure riding, this system replaces the heavy OEM steel muffler with a lightweight, high-grade titanium outer sleeve paired with a stainless steel link pipe and end cap.

By optimizing exhaust gas flow from the CP2 parallel-twin engine, the Akrapovic slip-on enhances power output across the entire RPM range, delivering an additional 2.3 horsepower at 4,800 RPM and a 2.0 Nm increase in torque at 4,800 RPM. In addition to power gains, the lightweight titanium construction reduces weight by 1.6 lbs (0.7 kg) compared to the factory muffler, helping lower the bike's center of gravity. The system features a deep, resonance-tuned rally exhaust note while remaining EC/ECE type-approved for street-legal use.

Features

• Titanium Construction: High-grade titanium muffler outer sleeve matched with a durable stainless steel link pipe and heat shield.

• Dyno-Proven Performance: Adds up to +2.3 HP at 4,800 RPM and +2.0 Nm of torque at 4,800 RPM for improved low-to-midrange throttle response.

• Weight Reduction: Weighs only 8.8 lbs (4.0 kg), shedding 1.6 lbs compared to the 10.4 lb factory exhaust assembly.

• Plug-and-Play Installation: Simple bolt-on design that connects directly to the stock header pipe without requiring ECU remapping or airbox modifications.

• Street Legal: Fully EC/ECE type-approved (Euro 5 compliant) for emissions and noise standards.

Akrapovic Installation Instructions for Tenere 700 Offroad Slip-On Muffler

What's in the Box:

• 1x Akrapovic Titanium Slip-On Muffler

• 1x Stainless Steel Link Pipe

• 1x Carbon Fiber / Stainless Heat Shield Assembly

• Complete Mounting Hardware Kit

• Installation Instructions

Fitment:

• 2019–2026 – Yamaha Tenere 700

• 2026 – Yamaha Tenere 700 World Raid

Fitment Notes:

• Yamaha Tenere 700 (T7): Fits 2020–2026+ Euro 5 and US models.

• Pannier Compatibility: Designed to fit with Yamaha OEM side cases and most aftermarket adventure luggage rack systems.

• No Remap Required: A major advantage of this Akrapovic slip-on system is that it operates within the stock ECU fuel-mapping parameters of the Yamaha CP2 engine. You do not need to install an aftermarket fuel tuner or flash the ECU to maintain safe air/fuel ratios; the system is factory-calibrated to deliver optimal power and throttle smoothness directly out of the box.

For the Asterisk Universal Carbon Fiber
Heat Shield:  CLICK HERE

Part Number:  S-Y7SO2-HFTT