ZETA Offset Bar Riser Kits for 7/8" & 1 1/8" Handlebars

Factory motorcycle ergonomics are designed for an "average" rider, meaning they are rarely perfect for anyone. If you find yourself hunched over while standing on the pegs, or feeling cramped in the cockpit, standard straight-up bar risers only solve half the problem. The Zeta Offset Bar Riser Kit allows you to fully customize your riding posture by providing 26MM of VERTICAL LIFT, coupled with 20mm of forward or backward offset adjustment.

By allowing you to moved the bars forward to open up the cockpit for taller riders, or move them backward to reduce reach for shorter riders, this kit dramatically reduces lower back, shoulder, and wrist fatigue. Precision CNC-machined from high-strength aluminum alloy, these risers maintain the rigid steering feel required for aggressive motocross, enduro, and dual-sport riding. Designed as a universal bolt-on upgrade, they integrate seamlessly with factory triple clamps and are available for both standard 7/8" and oversized 1-1/8" handlebars.

Features:

• Dual-Direction Offset: Provides 20mm of forward or rearward adjustment, allowing you to fine-tune your reach and shift your weight balance perfectly over the front wheel.

• 26mm Vertical Rise: Elevates the handlebars by just over an inch (26mm), instantly improving your standing posture and reducing lower back strain during long rides.

• CNC-Machined Aluminum: Milled from solid aluminum alloy for maximum strength and structural rigidity without adding unnecessary unsprung weight to the steering assembly.

• Universal Fitment: Engineered to mount directly into standard triple clamps with a bar clamp width between 32mm and 35mm.

• Anodized Finish: Treated with a heavy-duty anodized coating to resist corrosion, UV fading, and trail abrasion.

What's in the Box:

• 2x Zeta Offset Bar Risers (Left & Right)

• 4x High-Strength Mounting Bolts

Fitment Notes:

• Sizing Variants: Available for both 7/8" (22.2mm) and 1-1/8" (28.6mm) handlebar diameters. Please confirm your handlebar diameter at the clamping area before selecting your variant.

• Clamp Width: Fits motorcycles with a triple clamp mounting width between 32mm and 35mm.

• Cable Routing Warning: Raising and offsetting your handlebars alters the travel path of your control cables. Always check your throttle, clutch, and brake lines for full lock-to-lock steering clearance without binding before riding. Longer cables may be required on some models.

• Torque Specs & Gap: When installing the top clamps, always tighten the forward bolts completely first until the clamp bottoms out on the riser base, then torque the rear bolts to your manufacturer's spec. This ensures maximum clamping force and leaves a small, factory-correct visible gap at the rear of the clamp.