FREE SHIPPING ON ORDERS $149+

**SOME RESTRICTIONS APPLY

FREE SHIPPING ON ORDERS $149+

**SOME RESTRICTIONS APPLY

Search

Search

Go Back One Page

Yoshimura - RS-12 Adventure Full System Exhaust - Yamaha Tenere 700

Yoshimura RS-12 Full System for the Yamaha Tenere 700

The Yoshimura RS-12 ADV Full Exhaust System (13710AS521) is a complete header-back stainless steel and carbon fiber exhaust upgrade engineered specifically for the Yamaha Tenere 700 (XTZ700). The OEM Tenere 700 exhaust system weighs 18.5 lbs and incorporates a heavy, restrictive under-engine catalytic converter box alongside a low-mounted muffler bracket that routinely bends into the rear swingarm during right-side off-road tip-overs.

Designed, developed, and manufactured in Chino, California, the RS-12 ADV system replaces the entire factory exhaust from the cylinder head ports back, dropping total system weight to 12.2 lbs for a 6.3 lb (2.86 kg) reduction.Constructed from mandrel-bent 304L stainless steel treated with Yoshimura’s proprietary Works Finish, the larger-diameter headers and high-flow collector eliminate the stock catalytic restriction to deliver a verified 5.4% increase in peak horsepower and broader midrange torque across the 689cc CP2 parallel-twin rev range. The asymmetrical RS-12 muffler profile maximizes rear tire and swingarm clearance while integrating Yoshimura’s Precision Taper Fit (PTF) insert retention system for quick servicing of sound inserts and spark arrestors.

Features:

    • 6.3 lb Total Weight Reduction: Cuts exhaust system mass from 18.5 lbs (OEM) down to 12.2 lbs, removing high-mounted and low-slung dead weight.

    • 5.4% Peak Horsepower & Torque Gain:Eliminates the restrictive OEM catalytic converter box to boost midrange roll-on power and top-end output.

    • Asymmetrical RS-12 Muffler Profile: Maximizes internal packing volume for deep exhaust tone while providing increased clearance for rear tire travel, swingarm articulation, and pannier racks.

    • Precision Taper Fit (PTF) Insert Ring: Patent-pending tapered retention collar allows rapid, seize-free installation and removal of USFS spark arrestors and low-volume sound inserts.

    • Works Finish Stainless Construction: Media-treated 304L stainless steel headers, tailpipe, and canister sleeve resist corrosion and develop a uniform golden-bronze patina after initial heat cycling.

    • Matte Carbon Fiber End Cap & Heel Guard:Features a faceted matte carbon fiber end cap for reduced rear overhang weight and a laser-etched stainless steel heel guard.

    • Integrated O2 Sensor Bung: Welded M18 x 1.5 sensor port accepts the factory Yamaha oxygen sensor directly with no harness extensions required.

    • Made in the USA:Engineered, welded, and assembled at Yoshimura R&D in Chino, California.


Installation Instructions for the Yoshimura

RS-12 Full System for the Yamaha Tenere 700


What's in the Box:

  • 1x Yoshimura 304L Stainless Steel 2-into-1 Header & Collector Assembly (Works Finish)

  • 1x Stainless Steel Tailpipe / Mid-Pipe with Laser-Etched Heel Guard

  • 1x RS-12 ADV Stainless Steel Muffler with Matte Carbon Fiber End Cap (Part #13710AS521)

  • 1x Pre-Installed USFS-Approved Spark Arrestor Insert

  • 1x Heavy-Duty Exhaust Springs, Clamp, Subframe Mounting Bracket & Fastener Kit

  • 1x Detailed Installation Manual & Yoshimura Decal Sheet

Fitment:

  • 2019–2027 – Yamaha Tenere 700

  • 2026–2027 – Yamaha Tenere 700 World Raid

Fitment Notes:

  • O2 Sensor Configuration Note: Features a single M18 x 1.5 O2 sensor bung designed for North American and single-sensor Tenere 700 models. European Euro 5+ models (2025+) equipped with dual upstream/downstream O2 sensors will require ECU tuning/downstream sensor deletion if installing this full system.

  • Aftermarket Skid Plate & Luggage Note:Engineered to fit stock factory-equipped motorcycles. Removing the OEM catalytic converter frees up additional sump space; most aftermarket skid plates (AXP, Outback Motortek, Camel ADV) fit cleanly, though skid plates that bolt directly to the OEM catalytic converter bracket are incompatible.

  • Part Number Cross-Reference: Replaces earlier Yoshimura SKU13710AS520

  • Works Finish Surface Prep (Zero-Oil Rule Before First Startup): Yoshimura’s "Works Finish" is a specialized media-blasted stainless steel surface designed to heat-cycle into a uniform, rich golden-bronze hue.Before starting the motorcycle for the first time, wipe down the entire header, collector, mid-pipe, and muffler sleeve thoroughly with denatured alcohol, brake cleaner, or Maxima Electrical Contact Cleaner using a clean microfiber towel. Any skin oils, fingerprints, or assembly grease left on the bare stainless steel will permanently bake into dark, blotchy handprints within the first five minutes of engine operation.

  • Replace Exhaust Port Crush Gaskets & Stress-Free Alignment: Always install two new factory copper exhaust port crush gaskets (Yamaha OEM #4FM-14613-00-00) when swapping headers; reusing crushed OEM gaskets frequently causes header flange exhaust leaks and deceleration popping. Apply a small dab of high-temp grease to hold the new gaskets inside the cylinder head recesses during installation. Leave the four header flange nuts, collector springs, mid-pipe clamp, and subframe muffler bolt finger-tight until the entire system is assembled and aligned with the swingarm and rear brake reservoir. Torque fasteners progressively from the cylinder head backward so the pipes settle naturally without preload stress on the welds.

  • ECU Tuning & Fueling Behavior: The Yoshimura RS-12 full system is engineered to run safely on the stock Yamaha Tenere 700 ECU map via closed-loop O2 sensor feedback at steady throttle. However, removing the catalytic converter increases exhaust scavenging efficiency, which can make the factory lean Euro-compliant open-loop fuel map feel slightly abrupt on initial throttle pick-up and produce mild deceleration popping. Pairing this full system with an ECU flash (such as 2 Wheel DynoWorks) smooths on/off throttle transitions, lowers cylinder head temperatures, and unlocks the full midrange torque curve.


For the SA-19-K Yoshimura spark
arrestor baffles:  CLICK HERE

For Asterisk Universal Carbon Fiber
Heat Shield:  CLICK HERE









 

This product was designed to fit on a standard equipped motorcycle, as delivered from the factory. OE and aftermarket accessories not found on a bike as delivered from the factory may not be compatible with this product. Email us with any questions.



Part Number:  13710AS521



If you have any questions or need help finding what you need for your motorcycle or your next adventure please reach out:  
EMAIL US AT tmbrmoto@tmbrmoto.com- OR CALL - 208-254-2044