K&N Cartridge Oil Filter - KN-153
K&N premium oil filters for powersports vehicles utilize an innovative, highly efficient synthetic-blend filtration media designed to be compatible with synthetic, petroleum-based, and blended oils, including the high concentrations of synthetic racing oils. The heavy-duty canister is engineered to be exceptionally durable, and a 17mm welded hex nut can be used for quick and easy filter removal. Engineered to support exceptionally high flow rates while providing outstanding protection from harmful engine contaminants, each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N® 1-Year Limited Warranty.
Features:
- Designed to allow high flow rates and a consistent flow of oil to your engine
- Pleated synthetic-blend filtration media removes most harmful contaminants
- Fast and easy Wrench-Off® removal using the welded 17mm hex nut
- Pre-drilled nut for safety wire attachment
- Heavy-duty canister for outstanding durability
- Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
- Designed to operate with all synthetic, conventional, and blended motor oils
Fitment:
-
2022-2025 - Ducati DesertX
-
2024-2025 - Ducati DesertX Rally
-
1992-1993 - Ducati 888 SPO, 888 Strada
-
1996-1998 - Ducati 916 (Biposto, SPS, R)
-
1997-1999 - Ducati 748, 748S, 748SP, 748 Biposto
-
1997-2001 - Ducati 996 (Biposto, SPS, R, S)
-
2001-2002 - Ducati 998 (R, S, Bayliss, Bostrom)
-
2003-2006 - Ducati 999, 999S, 999R
-
2004-2005 - Ducati Monster 1000
-
2005 - Ducati 1000 DS
-
2007-2010 - Ducati GT1000 (Standard, Touring)
-
2007-2008 - Ducati 1098, 1098S
-
2008 - Ducati Desmosedici RR
-
2008-2013 - Ducati 848, 848 EVO, EVO Corse SE
-
2008-2013 - Ducati Hypermotard 1100, 1100S, 1100 EVO, EVO SP
-
2009-2011 - Ducati 1198, 1198S, 1198SP, 1198R
-
2013-2015 - Ducati Hypermotard 821
-
2016-2018 - Ducati Hypermotard 939, 939 SP
-
2019-2025 - Ducati Hypermotard 950, 950 SP
If you have questions about fitment, please
email us at: tmbrmoto@tmbrmoto.com
Specifications:
- Spin On Oil Filter
- Anti Drain Back Valve & Bypass Valve
- High Flow Premium Filter Media
- Nitrile Rubber Gasket
- Height: 3.344 in (85 mm)
- Outside Diameter: 3.063 in (78 mm)
- PSI Relief Valve Built In
- Thread Specification M16 X 1.5
- Welded External Removal Nut - 17mm
- Weight: 0.75 lb (0.1 kg)
- Warranty 1 Year Limited
Installation Note:When re-installing, torque the spin-on filter to 11–12 Nm (8–9 lb‑ft) to ensure a proper seal without over‑tightening.
For all K&N Filter products available from
TMBR MOTO: CLICK HERE
Cross Reference:
- Ducati 44443034A
- Ducati 44440312A
