{"product_id":"motion-pro-cable-luber-v3-08-0609","title":"MOTION PRO - CABLE LUBER V3","description":"\u003ch1\u003eMotion Pro Cable Luber V3 Tool For Keeping Brake and Throttle Cables Lubed\u003c\/h1\u003e\n\u003cdiv\u003e\n\u003cp data-path-to-node=\"1\"\u003eThe Motion Pro Cable Luber V3 (08-0609) is an essential maintenance tool engineered to quickly flush grit, moisture, and debris from control cables while forcing fresh lubricant down the entire length of the housing. Over time, dirt and water penetrate control cable housings, creating internal friction that leads to a stiff throttle turn, heavy clutch pull, and premature cable fraying or snapping.\u003c\/p\u003e\n\u003cp data-path-to-node=\"2\"\u003eFeaturing an updated, double-plunger rubber seal architecture, the Cable Luber V3 forms a pressure-tight hydraulic seal around cable housings ranging from 4mm to 8.5mm in diameter. This allows the tool to secure tightly onto outer housings without slipping or leaking aerosol lubricant out the sides. The specialized injector port accepts standard aerosol lube straw nozzles, directing 100% of the pressurized fluid straight down the cable sheath until clean lubricant exits the opposite end.\u003c\/p\u003e\n\u003ch4 data-path-to-node=\"3\"\u003eFeatures:\u003c\/h4\u003e\n\u003cul data-path-to-node=\"4\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"4,0,0\"\u003e\u003cb data-path-to-node=\"4,0,0\" data-index-in-node=\"0\"\u003eDouble-Plunger Rubber Seal:\u003c\/b\u003e Advanced rubber inner seal grips cable housings tightly to prevent aerosol blowback and fluid leakage during operation.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"4,1,0\"\u003e\u003cb data-path-to-node=\"4,1,0\" data-index-in-node=\"0\"\u003eUniversal Housing Fitment:\u003c\/b\u003e Adjusts securely onto smooth or threaded cable housing ends ranging from 4mm to 8.5mm in outer diameter.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"4,2,0\"\u003e\u003cb data-path-to-node=\"4,2,0\" data-index-in-node=\"0\"\u003eEfficient Flushing:\u003c\/b\u003e Forces aerosol cleaner and lubricant down the full length of the housing to wash out dirt, sand, and old oxidized grease.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"4,3,0\"\u003e\u003cb data-path-to-node=\"4,3,0\" data-index-in-node=\"0\"\u003eDurable Anodized Body:\u003c\/b\u003e CNC-machined aluminum body with an anodized finish and an ergonomic knurled plunger handle for easy hand tightening.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"4,4,0\"\u003e\u003cb data-path-to-node=\"4,4,0\" data-index-in-node=\"0\"\u003eExtends Cable Life:\u003c\/b\u003e Restores smooth lever\/throttle action and prevents internal wire corrosion and strand binding.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-path-to-node=\"5\"\u003eWhat's in the Box:\u003c\/h4\u003e\n\u003cul data-path-to-node=\"6\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,0,0\"\u003e1x Motion Pro Cable Luber V3 Tool (Part #08-0609)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4 data-path-to-node=\"7\"\u003eApplication \u0026amp; Usage Notes:\u003c\/h4\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eCable Preparation:\u003c\/b\u003e Disconnect the cable from the handlebar lever or throttle housing. Slide the tool over the exposed inner wire and clamp the rubber seal firmly onto the outer housing end.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eLube Straw Insertion:\u003c\/b\u003e Insert the straw of your preferred aerosol cable lubricant or contact cleaner into the rubber port and apply short bursts until clean fluid flows out the bottom end of the cable.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"12\"\u003e\u003cb data-path-to-node=\"12\" data-index-in-node=\"0\"\u003eTeflon\/Lined Cable Care:\u003c\/b\u003e Many modern OEM and high-end aftermarket control cables utilize an internal longitudinal PTFE (Teflon) liner to reduce friction. When lubricating lined cables, avoid using heavy, solvent-heavy chassis greases or harsh chemical penetrants that can degrade or swell the plastic liner. Always use a dedicated light cable lubricant (such as Maxima Cable Lube) that is explicitly labeled safe for Teflon-lined cables.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"13\"\u003e\u003cb data-path-to-node=\"13\" data-index-in-node=\"0\"\u003eThe Two-Step Flush:\u003c\/b\u003e For heavily contaminated off-road cables, use a two-step process with the Cable Luber V3. First, inject short bursts of electrical contact cleaner or brake cleaner through the tool to blast out trapped silt and grit. Once the runoff at the lower end runs completely clear, wait several minutes for the cleaner to evaporate, then inject dedicated cable lubricant until it emerges from the lower end. \u003ca href=\"https:\/\/www.tmbrmoto.com\/products\/motion-pro-cable-lube-can\" title=\"Shop TMBR MOTO for Motion Pro cable lube and other motorcycle maintenance supplies and tools.\"\u003e\u003cspan style=\"text-decoration: underline; color: rgb(215, 65, 35);\"\u003e\u003cstrong\u003eMotion Pro Cable Lube\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Pvg7uUw15zI\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\n\u003cbr\u003eWe recommend using Motion Pro \u003cbr\u003eCable Lube:  \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca title=\"TMBR MOTO MOTION PRO CABLE LUBE\" href=\"https:\/\/www.tmbrmoto.com\/products\/motion-pro-cable-lube-can\"\u003e\u003cstrong\u003e\u003cspan style=\"color: rgb(215, 65, 35); text-decoration: underline;\"\u003eCLICK HERE\u003c\/span\u003e\u003c\/strong\u003e\u003c\/a\u003e\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003ca title=\"Shop for Motion Pro tools, parts and accessories at TMBR MOTO. All of your motorcycle maintenance needs in one place.\" href=\"https:\/\/www.tmbrmoto.com\/collections\/motion-pro\"\u003e\u003cimg alt=\"Shop for Motion Pro tools, parts and accessories at TMBR MOTO.\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0622\/5720\/1317\/files\/Motion_Pro_Tools_Parts_and_Accessories_Banner.jpg?v=1780694060\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePart Number: 08-0609\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Motion Pro","offers":[{"title":"Default Title","offer_id":42613169389733,"sku":"MOPRO-CBLE-LUBER-V3","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0622\/5720\/1317\/products\/Motion_Pro_Cable_Luber_V3.jpg?v=1792513554","url":"https:\/\/www.tmbrmoto.com\/products\/motion-pro-cable-luber-v3-08-0609","provider":"TMBR MOTO","version":"1.0","type":"link"}